|Pixel density:||27777dots/sqm||Power Supply:||Meanwell|
|Life span:||100000hours||Cabinet size:||960*960|
Customized 1200Hz refresh rate 1/4 scan 10000 dots/sqm smd P6 P10 Electronic outdoor led screen IP65
1. CE,FCC,ROHS ISO9001 approved
2. High brightness: >6000nits, high refresh
3. Superior uniformity, good display effect
4. 2 years warranty, best after-sales service
5. Video, flash, animation, graphic, text available;
6. Installation structure drawing offered FOC;
7. Factory visiting and inspecting is welcome;
8. OEM service offered;
9. Models available:
Indoor led display-P2.5mm, P3mm, P4mm, P5mm, P6mm, P10mm, etc.
Outdoor led display-P5mm, P6mm, P8mm, P10mm, P16mm, etc.
1. Brand new mask design makes the light from LEDs almost non-reflection.
2. Cabinet design of the module uses high temperature spraying technology to improve the anti-rust function greatly.
3. Use high quality LEDs with high luminous efficiency and low brightness decay to make the display stable
4. The flatness of module erection side is controlled within 0.2mm, so as to ensure the flatness of the whole led display
5. With a full range of anti-static measures, effectively reducing the damage to LED from the static, so as to control the death rate of the LED within five over one million each year
6. Advanced technology of production ensures the quality and lifetime of LED display
7. Good uniformity in color solves the problem of mosaic well
8. With wave-soldering process and green oil protection from Oxygen on PCB, preventing the circuit from moist and Oxygen, so as to increase the lifetime of LED display
9. Utilization rate of power supply is improved a lot, reducing the failure rate of the power supply
10. Using good quality silicon gel in the front and waterproof rubber in the rear to improve the waterproof performance of LED display
11. Applied to all kinds of severe environment outside because of its high reliability, high brightness and high performance on waterproof and dustproof beyond IP65.
|1||LED Chip Brand||Epistar|
|2||Wave Length (nm)||R: 625nm;
|3||Pixel Configuration||1R1G1B SMD 3 in 1|
|Module & Cabinet Specification|
|4||Physics Distance Between Pixels||6mm|
|5||Physics Pixel Density||27,777 Pixel/m²|
|6||Module Dimensions (W x H)||192mmx192mm|
|7||Physics Pixel / Module||32x 32=1024|
|8||Cabinet Dimensions ( W x H xT)||960mmx960mmx150mm(Customized)|
|9||Physics Pixel / Cabinet||160x 160=25600|
|11||Cabinet Material||Steel Cabinet / Aluminum Cabinet|
|12||Cabinet Frame||Standard Frame
Lifting Frame (specially for rental use)
|14||Viewing Distance (min, max)||>6m|
|15||Power Consumption / Screen||MAX : 1000w/m² ;
AVE: 300w/m² ;
|16||Drive Mode||1/4 scan|
|17||Refresh Rate||300-3000 HZ adjustable|
|21||Led Life Span||100, 000 hours|
|22||Supply Voltage||AC220V/50HZ, ± 10%;
AC110V/60HZ, ± 10%
|23||Operating Temperature||-30º C~+50º C|
|25||Storage Temperature||-40º C~+60º C|
|26||Viewing Angle||Horizontal: 120° ; Vertical: 120°|
|27||Grey Scale||Red, green, blue each 16k|
|28||Display Colors||4096 Billion|
|30||Aging Time in Factory||More than 72 hours constantly|
|32||System Supported||Win 98 / 2000 / 2003 / XP / WIN7 / WIN10|
|33||Control Mode||Synchronous / Asynchronous|
|34||Display Capability||Flash, Video, Graphic, Text|
|35||Signal Supported||RGB, VGA, DVI, etc.|
We offer training for free.
You can send your engineer who has electronic and computer knowledge to our factory for the operation and maintenance training.
We also provide the operation manual, software, and so on. Any associated drawing of product and structure and some other professional suggestion will be provided too.
User's manual, instruction video, professional CAD installation drawing, and other needed engineering drawings will be provided.
We only offer the drawings, and you can show the drawing to your local steel structure factory, and they will weld it for you at site. On one hand, it is not cost effective for you to ship the steel structure from China. On the other hand, we are impossible to offer you exact steel structure without welding at site.
Comcreating provides 1 percent spare parts freely, including LED module, power supply, fan, receiving card, LED lamps and other related parts.
You can replace the broken one with the spare parts when problem happens, which will take about 5 minutes, and then send the broken ones back to our factory for fixing freely before you don't have enough spare parts for next maintenance.
We offer lifetime maintenance and charge only for the raw materials after the guarantee period. Additional charges will be required if you want more spare parts
Osoba kontaktowa: Candy Xu